Enttec DMX USB PRO Mk2 Bedienungsanleitung PDF herunterladen (Seite 18)

DMX Out (DMX 1 and DMX 2)

The DMX Out socket(s) should be connected to the network of DMX512 devices that are to

be controlled by the PRO Mk2. Both ports can be used to output at the same time (allowing

2 universe of DMX together). Please refer to the software support to confirm whether it

supports both outputs with PRO Mk2 or not.

It is not necessary to have any connection to the DMX Out socket while

programming the PRO Mk2.

DMX In (DMX 1 and DMX 2)

The DMX In socket(s) should be connected to the DMX512 controller whose output is to be

captured by the PRO Mk2. Input is captured and sent to the software interfacing with the

PRO Mk2.

Although there is only one DMX Input (DMX1) socket in the breakout cable, the

other socket (DMX2) can also be used as an input by using a Gender Changer

Each port can only be used as input or output at any single time.

Both ports are isolated and separated, so one can be used to receive DMX input,

and the other to output DMX, as long as the software supports this operation.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Keine Kommentare

Enttec DMX USB PRO Mk2 Bedienungsanleitung Seite 18